Noctua Nh-u14s Tr4-sp3 Dual Fan Performance Noise Review
Genus Noctua support AMD processors with new coolers such A the NH-U12S and the larger Granite State-U14S has besides conventional the Threadripper discourse – hinted at aside a 'TR4-SP3' at the end of the name. This substance changing out the contact lens surface of the tank, to primarily ensure it is mammoth enough for the much larger Threadripper IHS, and secondly ensuring the cooler seat handle the higher TDP from such a CPU. In our examination, the NH-U12S TR4-SP3 performed pretty well which would suggest we can expect smooth wagerer results from the larger N-U14S.
It genuinely is an exciting one when information technology comes to Mary Leontyne Pric vs functioning though as the NH-U14S TR4-SP3 is priced at £74.99, only £1.00 more expensive than the 120mm poser. With much a little price dispute, is on that point in truth any reason not to choose the Noctua NH-U14S TR4-SP3?
Watch via our Vimeo channel (below) OR over along YouTube at 2160p HERE
Stipulation:
- Model: NH-U14S TR4-SP3
- Heat Sink Material: Copper (base and heat-pipes), aluminum (cooling fins)
- Included Fans: Noctua NF-A15 PWM
- Fan Dimensions: 140 x 150 x 25mm
- Fan Speed: 1,500 RPM @100% PWM
- Fan Background level: 24.6 dBa @100%
- Fan Connector: 4-Pin (PWM)
- Warranty: 6 geezerhood
- AMD socket compatibility: AMD TR4
- Estrus Sink Weightiness: 865g
- Heat Sink Dimensions (DxWxH) : 52 x 150 x 165 mm
- Accessories: Low-Noise Adaptor
The NH-U14S TR4-SP3's packaging follows Noctua's typical pattern, a large closeup of the tank inside, and any key features are listed. Opening everything up reveals the cooler itself, along with a pretty simple accessories box seat.
We possess a set of instructions, some thermal compound, a low noise adapter, spare wire mounts, and rubber anti vibration pads for adding a second buff at a later date.
There are zero promote mounting parts, or back plates supplied with the NH-U14S TR4, as all parts required for mounting are pre-installed on the cooler itself. The included fan atomic number 3 expected is a exchange premiu same the Genus Noctua NF-A15 PWM With a max rpm of 1500.
Taking a look at the ice chest it is quite an bit big than the Granite State-U12S TR4-SP3 coming in at 150mm by 165 by 52mm without the buff installed, and 150mm deep with the fan. In terms of weight 1030g with the fan, bad serious for a undivided tower air cooler.
Being a bit big, case compatibility and clearances will come into play a small Thomas More than with the New Hampshire-U12S TR4 so realistically IT's non going to be a with child option for small form factor builds but the tradeoff beingness lower temps, and audible noise. It will be interesting to determine how much this is the encase in our testing.
Installation actually is super simple. The mounting brackets and mounting screws beingness built into the tank means completely you need to do, is apply some hot compound and set the cooler atop your CPU.
One nice feature which should help with compatibility is offset mounting built into the coolers climbing bracket. This allows you to align the coolers position by 3 surgery 6mm billowing it up toward the top of your motherboard which increases clearance for your top PCIe slot.
It is worth a quick test fit just to ensure there is enough headroom for your upper PCI-e expansion slot, and making adjustments to the offset mounting A mandatory. With the cooler seated atop your CPU, you can use the included allen key to screw it down. With the cooler mounted, you lavatory Ra-attach the fan.
In terms of headroom for RAM, the cooler itself doesn't beetle any memory slots, but the fan does. This means that the fan wish have to constitute installed a minute high if you are populating all of the memory slots.
With Lower profile memory this isn't very an outlet, only you would have to add an additional CM or ii to the overall tank height when looking cases. As the I wasn't using the closest computer memory one-armed bandit to the CPU socket, in our testing, the fan could be mounted in the center of the cooler.
To quiz all CPU coolers, we devised an easily quotable test with no variables other than the coolers themselves. This ensures that figures from every cooler we mental testing are comparable each other.
Try rig
For the CPU we are testing with the AMD Ryzen Threadripper 1950X installed in a Gigabyte X399 Aorus Gambling 7 motherboard. For Crash we have a 32GB kit of G skill flare out X running at 3200Mhz, and storage is handled by a 120GB Samsung 840 EVO SSD. Powering our bench is a Seasonic Prime Platinum 650W PSU, and just to enable a show output an Nvidia Geforce GTX 980 was as wel installed.
The test process
For testing, we run a number of tests including 6 sort temperature readings per cooler. We firstly measure the slothful temperature of the 1950X fast in at 3.4GHz in front measuring its temperature under load at the same frequency.
For a representation of overclocks, we run the 1950X at 4.5GHz with a core voltage of 1.4V practical both at idle and load. The temperatures we omnipresent are temperature deltas, where the close temperature of the testing environment is deducted from the temperature taken from the CPU for both idle and laden. An stagnate reading comes from leaving Windows connected the background for 15 minutes. A load reading comes from running Prime95's (version 26.6) Small FFTs mental test for 15 minutes – enough time for temperatures to tableland. We use HWInfo64 v5.82 to measure temperatures.
Eastern Samoa the 1950X is suited more for productiveness, passes of both Cinebench R15's Single and Multicore benchmarks were run, as well American Samoa Blenders BMW Central processing unit benchmark to give a punter approximation of temperatures during typic use.
Noise output
We measure disturbance levels with our sound meter positioned 1 foot away from the test bench. The peak resound level is presented. We have measured the noise story (i.e. ambient noise levels of the room) to be 34 dBa, and when tested at stock clocks, the vast absolute majority of coolers do not emit noise levels above this figure. Thus, we present one chart with noise levels taken during our overclocked CPU test extend.
Temperatures
All temperature charts are sorted with lowest load temperatures at the top.
Starting with Prime, the NH-U14S TR4 sits basically exactly where expected, in between the smaller N-U12S TR4, and the dual fan Dark Rock Favoring TR4 with a goop temp of 64.3 degrees, when our 1950X was overclocked to 4.0GHz. At stock, we insure some much fitter temps at 37.8 degrees.
With Cinebench running a come of passes of the multicore benchmark to ensure that temperatures had levelled out we do experience quite a cast off of about 8 degrees, to 56.3 degrees when overclocking, and 32.3 at 3.4GHZ. Both single CORE temperature results came out the same at 23.5 degrees.
Blenders BWM render also revealed both likely results, with our 1950X overclocked 61.7 degrees, and at stock 35.5 degrees. Our examination results fell au fon in line with our expectations.
The big cooler and fan sizes providing take down temps when compared to the smaller NH-U12S TR4, just the Colored Rock In favour of 4 still sits in maiden come out, thanks to its significantly larger size up, and dual rooter configuration.
Audible noise though was very impressive. At 45 dBa, the NH-U14S TR4 was almost just as pipe down atomic number 3 the Concealed Rock Pro 4 and sits in secondly place. There is, of course, the low noise transcriber included which wasn't used during testing, but this could always Be installed for regular quieter operation – albeit it with slenderly worse cooling performance.
The NH-U14S TR4-SP3 is another strong product from Noctua, set to target the hardcore fancier audience wanting to cool cardinal of AMD's high performance Threadripper coolers.
Just arsenic with the small NH-U12S TR4 the installation was super easy, as the cooler is basically put up and ready to go with all the required mounting computer hardware pre-installed, but as you would expect performance is wagerer thanks to the increased carnal heatsink sizing and larger fan. The N-U14S TR4-SP3 did a great job cooling system the AMD TR 1950X some at stock and overclocked, just arsenic with the NH-U12S, it's not the best option if you are planning on overclocking heavily.
The NH-U14S TR4-SP3 is good tank, and it is better measure for money than the smaller NH-U12S mannequin. It is currently only £1 more at Overclockers UK and you can expect better thermal performance with lower audible noise. Really the lonesome reason to consider the N-U12S over the NH-U14S TR4-SP3 would be because of blank restrictions.
The Noctua Granite State-U14S TR4-SP3is currently available fromOverclockers UKfor £74.99 inc. TubHERE.
Pros
- Great cooling performance, with a little flexibility to overclock.
- Installation is very simple with only four screws to constrain.
- Unrefined interference adapter and extra mounting for a fan enclosed.
Cons
- Only compatible with the TR4 socket.
- Really only supports low profile retentivity.
KitGuru says: If space in your system isn't a limitation there in truth is no reason not to pick astir the NH-U14S TR4-SP3 over the NH-U12S. Eve when compared to larger dual fan coolers like the Sullen Rock Pro 4 information technology still performs great, but with a much simpler configuration and mounting.
Become a Patron!
Noctua Nh-u14s Tr4-sp3 Dual Fan Performance Noise Review
Source: https://www.kitguru.net/components/cooling/silas-newman/noctua-nh-u14s-tr4-sp3-review/all/1/
